Home> Products> Wireless > X-Sense Access Point Series>

RG-AP530-I V2 802.11ac Wireless Access Point

Ruijie RG-AP530-I V2 is an indoor dual-band, dual-radio 802.11ac wireless access point designed for the higher education, government, healthcare, financial and commercial sectors. The AP supports 3 spatial streams and delivers access rates of up to 450Mbps@2.4GHz, 1300Mbps@5GHz. With an outstanding performance of 1.75Gbps per AP, the wireless performance is no longer a bottleneck.
 
The RG-AP530-I V2 AP also features security, radio frequency (RF) control, mobile access, Quality of Service (QoS) and seamless roaming. Teaming up with Ruijie RG-WS Series Wireless Access Controllers (ACs), wireless data forwarding, security and access control can be accomplished with ease.
 
Implementing the leading 802.11ac protocol, the AP deploys a dual-band, dual-radio design supporting 2.4GHz (802.11b/g/n) and 5GHz (802.11a/n/ac).
 
More+

Smart Wireless Coverage

  • 802.11ac Gigabit Access Rate

The 5GHz band of RG-AP530-I V2 AP supports 802.11ac, the next-generation Wi-Fi standard, and offers a maximum connection rate up to 1300Mbps. When the dual bands operate simultaneously, the AP achieves an ultra-fast speed of up to 1.75Gbps. Comparing to the conventional 802.11n standard, the throughput is greatly enhanced. The RG-AP530-I V2 AP delivers a truly high-speed user experience.

  • Remarkable Energy-saving Design

The AP adopts advanced power-saving features including single-antenna standby, dynamic MIMO power saving, enhanced transmission technology with automatic power saving and packet-by-packet power control. Coupled with the high-performance power supply design, the AP guarantees high-speed wireless access and maximized signal coverage under 802.3af power supply.

  • Industry-leading Local Forwarding Technology

Employing an industry-leading local forwarding technology, the AP eliminates the traffic bottleneck of ACs. In collaboration with Ruijie RG-WS Wireless AC Series, users can flexibly pre-set a forwarding mode for the RG-AP530-I V2 AP. The AP can determine whether to forward data to the AC according to a SSID or user VLAN, or directly send the data to a wired network for data exchange.

The local forwarding technology can forward large-scale, delay-sensitive and real-time transmission data through the wired network. The feature significantly alleviates the traffic pressure on the wireless controllers and better fulfills the high traffic transmission requirements of 802.11ac network.

  • Abundant QoS Policies

The AP supports an extensive array of QoS policies. For example, it provides bandwidth limitations in WLAN/AP/STA modes and Wi-Fi multimedia (WMM) that defines different priorities for different service data. The AP realizes timely and quantitative transmission of audio and video and guarantees smooth operation of multi-media applications.

With the multicast-to-unicast conversion technology, the AP resolves the video interruption problem due to packet loss or long delay in the wireless Video on Demand (VoD) system. The AP highly enhances user experience with multicast video over wireless networks.

Flexible Device Management Mode

  • Flexible Switching Between FAT & FIT Modes

The AP supports flexible switching over the FAT and FIT modes according to the networking requirements of different industries. When there are few APs, users can adopt the FAT mode for easy, independent network establishment. For large-scale networks, the AP can operate at FIT mode and works with RG-WS ACs to allow centralized management of all the APs and other aspects such as security, traffic management, QoS and IP management. Smooth transition from one mode to another, the AP fully protects user investment.

  • Simple Deployment With Zero Configuration

Under the FIT mode, no configuration is required for the AP before deployment. Also, no manual configuration is necessary for on-site installation, maintenance or replacement. Download and auto implementation of AP configuration can all be completed via the AC. This user-friendly feature remarkably reduces installation and maintenance workload as well as investment costs.

  • PoE Port For Easy Deployment & Maintenance

In addition to local power supply, the AP also supports the 802.3af/802.3at PoE standard. With PoE switch or PoE power adapter, a single Ethernet cable can provide both data connection and electrical power to the AP. The network administrator can remotely control the devices. It also solves the problem of unstable power source, hence simplifying the installation process and maximizing the cost savings.

 

Model

RG-AP530-I V2

Radio

Concurrent dual-radio dual-band

Protocol

802.11a/b/g/n/ac

Operating Bands

802.11b/g/n: 2.4GHz to 2.483GHz
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz
(vary depending on countries)

Spatial Streams

3

Max Throughput

450Mbps@2.4GHz
1300Mbps@5GHz
1.75Gbps per AP

Modulation

OFDM: BPSK@6/9Mbps
QPSK@12/18Mbps
16-QAM@24Mbps
64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps
DQPSK@2Mbps
CCK@5.5/11Mbps
MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM

Receiver Sensitivity

11b:-93dBm(1Mbps),-89dBm(5Mbps),-87dBm(11Mbps)

11a/g:-89dBm(6Mbps),-82dBm(24Mbps),-78dBm(36Mbps),-72dBm(54Mbps)

11n:-85dBm@MCS0,-67dBm@MCS7,-83dBm@MCS8,-65dBm@MCS15

11ac HT20:-85dBm(MCS0), -60dBm(MCS9)

11ac HT40:-82dBm(MCS0), -60dBm(MCS9)

11ac HT80:-79dBm(MCS0), -54dBm(MCS9)

Transmit Power

≤100mW (20dBm, transmit power of the RF card only)

Adjustable Power

1dBm

Service Port

1 10/100/1000BASE-T Ethernet uplink port (PoE)

1 10/100/1000BASE-T Ethernet uplink port

Management Port

1 console port (RJ45)

LED Indicators

1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode)

IP Rating

IP41

Safety Standard

GB4943, EN/IEC 60950-1

EMC Standard

GB9254, EN301 489

Health Standard

EN 62311

Radio Standard

EN300 328, EN301 893

WLAN

Maximum clients per AP

Up to 256

BSSID capacity

Up to 16 per radio

Up to 32 per AP

SSID hiding

Support

Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID

Support

Remote Intelligent Perception Technology  (RIPT)

Support

X-speed

Support

Intelligent identification of smart device

Support

Intelligent load balancing based on the number of users or traffic

Support

STA control

SSID/radio-based

Bandwidth control

STA/SSID/AP-based speed control

Preference for 5 GHz (band select)

Support

Dynamic Frequency Selection (DFS)

Support

Security

PSK, Web, and 802.1x authentication

Support

Data encryption

WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)

WeChat authentication

Support

QR code authentication

Support

SMS authentication

Support

PEAP authentication

Support

Data frame filtering

Whitelist, static/dynamic blacklist

User isolation

Support

Rogue AP detection and countermeasure

Support

Dynamic ACL assignment

Support

WAPI

Support

RADIUS

Support

CPU Protection Policy (CPP)

Support

Network Foundation Protection Policy (NFPP)

Support

L2 Features

IGMP snooping

Support

VLAN features

Support

Routing

IPv4 address

Static IP address or DHCP reservation

IPv6 CAPWAP tunnel

Support

ICMPv6

Support

IPv6 address

Manual or automatic configuration

Multicast

Multicast to unicast conversion

Location-based Service

Wireless position tracking

Support

Management and Maintenance

Network management

SNMP v1/v2C/v3, Telnet, SSH, TFTP, FTP and Web management

Real-time spectrum analysis

Support

Fault detection and alarm

Support

Statistics and logs

Support

FAT/FIT switching

The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.

Dimensions (W x D x H) (mm)

205 × 205 × 42

Weight

0.7kg

Installation Mode

Ceiling/wall-mountable

Power Supply

Local power supply (DC 48V) and PoE (802.3af/at)

(Power adapters sold separately)

Power Consumption

<12.95W

Temperature

Operating Temperature: -10°C to 50°C

Storage Temperature: -40°C to 70°C

Humidity

Operating Humidity: 5% to 95% (non-condensing)

Storage Humidity: 5% to 95% (non-condensing)

 

Model

Description

RG-AP530-I V2

Indoor Wireless Access Point, dual-radio, dual-band, 3 spatial streams, access rate up to 1750Mbps per AP, support concurrent 802.11ac and 802.11a/b/g/n, FAT/FIT modes, 1 10/100/1000BASE-T uplink port, support PoE and local power supply 
(PoE and local power adapters sold separately)

 

  • Sales Enquiry