RG-AP820-L(V2) Wireless Access Point

Model

 RG-AP820-L(V2)

Hardware specifications

Radio

Dual-radio dual-band:

Radio 1: 2.4G 11ax/5G 11ax: 2×2 MIMO

Radio 2: 5G 11ax: 2x2 MIMO

Protocol

Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac

Operating Bands

802.11b/g/n/ax :2.4G ~ 2.483GHz

802.11a/n/ac/ax : 5.150~5.350GHz,5.47~5.725GHz,5.725~5.850GHz (vary depending on different countries)

Spatial Streams

Up to 4: 2×2:2 in 2.4GHz , 2×2:2 in 5GHz

Max Throughput

Maximum throughput (5G+5G mode) per AP: 2.4Gbps

Radio1:5G low band 1.2Gbps

Radio2:5G high band 1.2Gbps

 

2.4G+5G operation mode, maximum throughput per AP: 1.775Gbps

Radio1:2.4G 0.574Gbps

Radio2:5G 1.2Gbps

Modulation

OFDM:BPSK@6/9Mbps,QPSK@12/18Mbps,16-QAM@24Mbps,64-QAM@48/54Mbps

DSSS:DBPSK@1Mbps,DQPSK@2Mbps,and CCK@5.5/11Mbps

MIMO-OFDM:BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM

OFDMA (up to 1024-QAM)

Receiver Sensitivity

11b:-96dBm(1Mbps),-93dBm(5Mbps),-89dBm(11Mbps)

11a/g:-91dBm(6Mbps),-85dBm(24Mbps),-80dBm(36Mbps),-74dBm(54Mbps)

11n:-90dBm(MCS0),-70dBm(MCS7),-89dBm(MCS8),-68dBm(MCS15)

11ac HT20:-88dBm(MCS0), -63dBm(MCS9)

11ac HT40:-85dBm(MCS0), -60dBm(MCS9)

11ac HT80:-82dBm(MCS0), -57dBm(MCS9)

11ax HT80:-82dBm(MCS0), -57dBm(MCS9), -52dBm(MCS11)

Antenna

Integrated antenna design

Antenna Gain

2.4G: 3dBi

5G: 3dBi

Service Ports

1 10/100/1000M Ethernet ports, PoE In 

Management Port

1 console port

Reset Button

Support

Anti-theft Lock

Support

LED Indicator

1 LED indicator (Support red, green, blue, orange and flashing mode, which indicates device access)

Transmit Power

≤100mw(20dBm) (vary depending on different countries)

Adjustable Power

1dBm

Power Supply

Local power supply (DC 48V/1A) (DC Power adapters should be purchased from third-party vendors separately if needed)

PoE (802.3af) – full spectrum operation

Power Consumption

<12.95W

Physical Specifications

Temperature

Operating Temperature: -10°C to 50°C

Storage Temperature: -40°C to 70°C

Humidity

Operating Humidity: 5% to 95% (non-condensing)

Storage Humidity: 5% to 95% (non-condensing)

Installation Mode

Ceiling/wall-mountable

Dimensions (W x D x H)

153mm ×193mm x26mm(Height of the AP only, excluding the mount kit)

Weight

≤0.5kg (include mount kit)

IP Rating

IP41

MTBF

250,000 hours

Certifications and Compliance

Wi-Fi Alliance

· Wi-Fi CERTIFIED™ a, b, g, n, ac

· Wi-Fi CERTIFIED 6™

· WPA3™-Enterprise, Personal

· Wi-Fi Enhanced Open™

· Wi-Fi Agile Multiband™

· WMM®

Safety Standard

GB4943, EN/IEC 62368-1

EMC Standard

GB9254, EN301 489

Radio Standard

SRRC, EN300 328, EN301 893

Software Specifications

WLAN

Maximum clients per AP

1024

BSSID capacity

Up to 32

SSID hiding

Support

5G Priority (Band Steering)

Support

Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID

Support

Remote Intelligent Perception Technology (RIPT)

Support

Intelligent device recognition technology

Support

Intelligent load balancing based on the number of users or traffic

Support

STA control

SSID/radio-based

Bandwidth control

STA/SSID/AP-based bandwidth control

Data encryption

WPA(TKIP), WPA-PSK, WPA2(AES), WPA3, WEP(64/128 bits)

PSK and web authentication

Support

PPSK authentication (For Employee)

Support (require wireless controller)

802.1x authentication

Support

PEAP authentication

Support

Data frame filtering

Whitelist, static/dynamic blacklist

User isolation

Support

Rogue AP detection and countermeasure

Support

Dynamic ACL assignment

Support

RADIUS

Support

CPU Protection Policy (CPP)

Support

Network Foundation Protection Policy (NFPP)

Support

IP

IPv4 and IPv6 address

Support

Multicast routing

Multicast to unicast conversion

DHCP service

DHCP Snooping, Option 82, Server, Client

Management and Maintenance

Supported wireless LAN controllers

Ruijie WS Series Wireless Controller

Ruijie MACC-Base Software Controller

Ruijie Cloud (Public Cloud)

Management protocol

Telnet, SSH, TFTP, Web

Wireless Intelligent AI Optimization Service (WIS)

Support

SNMP

SNMPV1,V2c,V3

LLDP

LLDP, LLDP-MED, LLDP-POE

Syslog / Debug

Support

FAT/FIT/MACC mode switching

Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management

 

Ruijie Networks

About Cookies on this site

This site uses cookies (“Cookies”) to improve your online experience, and to learn what content is most useful to visitors.By clicking “Allow analytics”, you are agreeing to Ruijie's use of Cookies. If you click “No analytics please”,apart from “necessary” Cookies (e.g. required for ensuring security and provision of our site functions), no Cookies will be used. To revoke your consent, please configure the cookie setting in your browser setting, change your preference in this banner or visit our Cookie Policy