RG-AP630(IDA2), Wi-Fi 5 Dual-Radio 2.533 Gbps Outdoor Access Point

Picture

RG-AP630(IDA2), Wi-Fi 5 Dual-Radio 2.533 Gbps Outdoor Access Point

Outdoor scenarios such as campuses, city blocks, and plazas

Models

Series

Highlight Features

802.11ac/802.11ac wave 2 superior wireless performance
Built-in directional antennas, focused coverage and strong signal
Industrial-grade product design, built-in lightning arrester
Unified WIS cloud management, intelligent O&M

Overview
FAQ
Documents
Specifications
Order Information

Key Specification

Product Overview
The RG-AP630(IDA2) is a wireless access point (AP) designed by Ruijie for next-generation high-speed wireless LANs. Adhering to the latest 802.11ac Wave2 standard, the AP delivers an access rate of up to 1733Mbps+800Mbps. It features security, radio frequency (RF) control, mobile access, Quality of Service (QoS), and seamless roaming. In addition, it can be managed by RG-WS series wireless access controllers (ACs) to implement wireless data forwarding, security, and access control.

The IP68 design adapts to inclement outdoor environments such as the cold and humidity. This substantially simplifies installation and maintenance. The RG-AP630(IDA2) offers flexible antenna switching and full coverage for various outdoor situations. Moreover, multi-hop and point-to-multi-points bridging enhances the deployment. The AP fed by IEEE 802.3at-compliant PoE accommodates various monitors and receives real-time monitoring information. It is perfectly suited for such sites as campuses, city blocks, and plazas.

FAQ

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Ask a Question

Documents

Ruijie RG-WLAN Series Access Points Web-based Configuration Guide, RGOS11.1(9)B1P23 (V1.0)

Ruijie RG-WLAN Series Access Points Command Reference, RGOS11.1(9)B1P23 (V1.0)

Ruijie RG-WLAN Series Access Points Configuration Guide, RGOS11.1(9)B1P23 (V1.0)

Ruijie RG-WLAN Series Access Points Release Notes, RGOS11.1(9)B1P23 (V1.0)-RG-AP630(IDA2)

Ruijie RG-AP630(IDA2) Wireless Access Point Firmware

RG-AP630 Outdoor AP Series Datasheet

Specifications

Model		RG-AP630(IDA2)
Target Deployments		For big campus, wireless city, harbor, storage room, mine
Basic Specifications	Radio	Concurrent dual-radio dual-band
	Protocol	802.11a/b/g/n/ac Wave2
	Operating Bands	802.11 b/g/n: 2.4GHz to 2.483GHz 802.11a/n/ac: 5.150GHz to 5.350GH z, 5.47GHz to 5.725GH z, 5.725GHz to 5.850GHz (vary depending on countries)
	Antenna	Built-in Directional Smart Antenna (support external/ internal antenna switching)
	Antenna Lobe Orientation	Internal Directional: Horizontal 60 degrees, Vertical 30 degrees
	Antenna Gain	10dBi

Model		RG-AP630(IDA2)
Basic Specifications	Max Throughput	Build-in antenna model: 800Mbps@2.4G 1733Mbps@5G 2.533Gbps per AP; External antenna model: 600Mbps@2.4G 1300Mbps@5G 1.9Gbps per AP
	Spatial Streams	4
	Modulation	OFDM: BPSK@6/9Mbps QPSK@12/18Mbps 16-QAM@24Mbps 64-QAM@48/54Mbps DSSS: DBPSK@1Mbps DQPSK@2Mbps CCK@5.5/11Mbps MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM
	Receiver Sensitivity	11b: -99dBm(1Mbps), -93dBm(5.5Mbps), -90dBm(11Mbps) 11a/g:-93dBm(6Mbps), -85dBm(24Mbps), -82dBm(36Mbps), - 77dBm(54Mbps) 11n:-92dBm@MCS0, -73dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15 11ac HT20: -90dBm (MCS0) , -63dBm (MCS9) 11ac HT40: -85dBm(MCS0) , -60dBm (MCS9) 11ac HT80: -82dBm(MCS0) , -58dBm (MCS9)
	Maximum Transmit Power	27dBm transmit power depends on local laws and regulations.
	Adjustable Power	1dBm
	IP Rating	IP67
Ports	Service Port	1 10/100/1000 Base-T ETH1/PoE IN port, 1 10/100/1000 Base-T ETH2 port, 1 1000M SFP port (combo)
Ports	Management Port	1 console port (RJ45)
Power	Power Supply	PoE+ (802.3at)
Power	Power Consumption	<25W
WLAN	Maximum clients per AP	Up to 512
	BSSID capacity	Up to 16 per radio Up to 32 per AP
	SSID hiding	Support

Model		RG-AP630(IDA2)
WLAN	Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID	Support
	Remote Intelligent Perception Technology (RIPT)	Support
	X-speed	Support
	Intelligent load balancing based on the number of users or traffic	Support
	STA control	SSID/radio-based
	Bandwidth control	STA/SSID/AP-based speed control
	Preference for 5 GHz (band select)	Support
	Wireless position tracking	Support
	Dynamic Frequency Selection (DFS)	Future Release Support
Security	PSK, Web, and 802.1x authentication	Support
	Data encryption	WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)
	QR code authentication	Support
	SMS authentication	Support
	PEAP authentication	Support
	Data frame filtering	Whitelist, static/dynamic blacklist
	User isolation	Support
	Rogue AP detection and countermeasure	Support
	Dynamic ACL assignment	Support
	RADIUS	Support
	CPU Protection Policy (CPP)	Support
	Network Foundation Protection Policy (NFPP)	Support
	Wireless Intrusion Detection System (WIDS)	Support
	Wireless Intrusion Prevention System (WIPS)	Support
Routing	IPv4 address	Static IP address or DHCP reservation
	IPv6 CAPWAP tunnel	Support
	ICMPv6	Support
	IPv6 address
	ISATAP	Support
	Multicast	Support

Model	RG-AP630(IDA2)
Management and Maintenance	Network management	SNMP v1/v2C/v3, Telnet, SSH, TFTP and web management
	Visualized wireless heat map analysis	Support (needs to integrated with SNC)
	Real-time spectrum analysis	Support (needs to in tegrated with SNC)
	Fault detection and alarm	Support
	Cloud AC management	Support
	Statistics and logs	Support
	FAT/FIT switching	The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.
External Characterisitics	Lock	Support
External Characterisitics	LED Indicators	Power status and WDS signal strength
Relevant Standard	Wi-Fi Alliance Certification	Support
	Safety Standard	GB4943, EN/IEC 60950-1, EN/IEC 60950-22
	EMC Standard	GB9254-2008, EN301 489, EN55022
	Health Standard	EN 50385
	Radio Standard	FCC Part15, EN300328, EN301893
	Vibration Standard	GB/T 2423
Specifications	Dimensions (W x D x H) (mm)	276 x 246 x 90
Specifications	Weight	<2.5kg
Work Environment	Temperature	Operating Temperature: -40°C to 65°C (heater module will be enabled at -15°C)
	Temperature	Storage Temperature: -40°C to 85°C
	Humidity	Operating Humidity: 0% to100% (non-condensing)
	Humidity	Storage Humidity: 0% to 100% (non-condensing)
Installation Mode		Wall/pole-m ount installation

Outdoor Antennas

Model		RG-ANTx3-2400D	RG-ANTx3-5800D	RG-ANTx3-2400&5800(o)
Type of External Antenna		Directional	Directional	Omnidirectional
Electrical Specifications	Frequency range	2.4 to 2.483GHz	5.125 to 6.100GHz	2.4 to 2.5GHz 5.125 to 6.100GHz
	Gain	3 x 15dBi	2 x 19dBi (vertical) + 16dBi (dual inclined planes)	8 dBi
	Horizontal beamwidth	65°	21°	360°
	Vertical beamwidth	16°	16°	17°
	Front-to-back ratio	< -25 dB	< -25 dB	<-25 dB
	VSWR	< 1.5	<1.5	<1.5
	Polarization	2VP (vertical polarization)+1HP (horizontal polarization)	±45° and vertical polarization	VP (vertical polarization)
	Input impedance	50 ohms	50 ohms	50 ohms
Mechanical Specifications	Mounting mode	Pole mounting (pole diameter 30 to 50 mm)	Pole mounting (pole diameter 50 to 120 mm)	Pole mounting (pole diameter 40 to 70 mm)
	Temperature range	-40°C to 60°C	-40°C to 60°C	-40°C to 60°C
	Unit weight	2.3 kg	1.3 kg	1.2 kg
	Dimensions	400 x 240 x 35 mm (L x W x H)	380 x 380 x 33 mm (L x W x H)	145 x 330 mm
	Connector	3 x N-K	3 x N-K	6 x N-K

Order Information

Model	Description
RG-AP630(IDA2)	Outdoor Wireless Access Point, built-in directional smart antenna and lightning arrester, support internal/external antenna switching, support concurrent 802.1 1a/b/g/n/ac and WAVE2, FAT/FIT mode, PoE+ (Installation Mount-Kit included, but PoE adaptor sold separately)
Optional Accessories
RG-S2910-24GT4SFP-UP-H	24 x 10/100/1000BASE-T ports for downlink and 4 x gigabit SFP ports (non-combo) for uplink. To support HPOE (Port1~4), POE+, POE, 1 console port
Optional External Antennas
RG-ANTx3-2400D	2.4 GHz MIMO outdoor directional antenna kit, include: 15dBi panel antenna (1 set); 1-meter N-N coaxial cables (3 sets); waterproof materials (1 set)
RG-ANTx3-5800D	5.8 GHz MIMO outdoor directional antenna kit, include: 19dBi panel antenna (1 set); 1-meter N-N coaxial cables (3 sets); waterproof materials (1 set)
RG-ANTx3-2400&5800(O)	2.4 GHz & 5.8 GHz MIMO outdoor omnidirectional antenna kit, include: 8dBi panel antenna (1 set); 1-meter N-N coaxial cables (6 sets); waterproof materials (2 sets)